I2M Eliminator for removing the ABS control unit for Yamaha YZF-R1 / R1M RN32 / RN49 (2015–2019) – clean ABS delete solution for uncompromising R1 track bikes. The right electronic solution for consistent track modifications!

The Yamaha YZF-R1 and R1M of the RN32 and RN49 series are among the most sought-after superbikes for ambitious track days and professional racetrack setups. Those who consistently focus these motorcycles for track use want to remove unnecessary components without provoking issues with the vehicle's electronics. This is where the I2M ABS Eliminator comes into play.

With this emulator, the original ABS control unit can be removed without the motorcycle responding with error messages, warnings, or electronic disturbances afterward. This makes the I2M Eliminator the ideal solution for riders who want to build their bike functionally, lightly, and technically clean.

Plug-and-Play installation without soldering or cable modification

The I2M ABS Eliminator for Yamaha YZF-R1 / R1M RN32 / RN49 is designed for a fully plug-and-play capable installation. No cables need to be cut, no connectors modified, and no wires soldered. The ABS unit is removed, and the emulator is connected directly.

Especially with high-performance superbikes featuring modern Electronics, this is a crucial advantage. Because improper ABS removal can quickly lead to system errors or the loss of other functions. With the I2M system, you rely on a clean and technically well-thought-out solution.

Replicates sensor signals for clean operation of the remaining Electronics

A high-quality ABS eliminator must do more than just avoid warning messages. The I2M Eliminator replicates the relevant signals from the speed sensors so that other original systems can continue to operate correctly.

This is especially important for the Yamaha R1 and R1M, where Electronics and performance work closely together. This way, your track bike remains not only lighter and cleaner but also electronically reliable and professionally built.

Advantages at a glance

• Fits Yamaha YZF-R1 / R1M RN32 / RN49 (2015–2019)
• Plug-and-play installation without modifications to the original wiring harness
• Prevents error messages in the control unit
• Supports the correct transmission of relevant sensor signals
• Very compact and lightweight design
• Designed exclusively for use on the racetrack

For whom is the I2M ABS Eliminator the right choice?

This product is ideal for you if you:

• want to specifically set up your Yamaha YZF-R1 or R1M for the track
• are looking for a clean ABS delete solution without any DIY work
• value plug-and-play and an untouched wiring harness
• want to maintain the clean functionality of the remaining Electronics despite ABS removal
• want to prepare your motorcycle functionally and weight-optimized for track use

Important Note

This product is intended exclusively for use on the racetrack and is not approved for public road traffic.

Our Conclusion

The I2M ABS Eliminator for Yamaha YZF-R1 / R1M RN32 / RN49 (2015–2019) is the right choice for riders who want to prepare their motorcycle technically clean and without improvised solutions for track use. The plug-and-play installation, compact design, and secure electronic integration make it a compelling solution for professional R1 track bike conversions.