I2M Eliminator for removing the ABS control unit for MV Agusta F3 675 / 800 (2012–2021) – a clean ABS delete solution for your track bike. Less weight, more focus on performance!

The MV Agusta F3 675 and F3 800 are motorcycles that impress on the racetrack with precision, agility, and a very direct riding feel. Those who consistently orient their bike towards track use pay attention not only to performance and Suspension, but also to unnecessary weight and clean electronic solutions. This is exactly where the I2M ABS Eliminator comes into play.

With this emulator, you can remove the original ABS control unit without the motorcycle subsequently throwing error messages or disturbing other electronic functions. This makes the I2M Eliminator a professional solution for anyone looking to optimize their F3 specifically for track use.

Plug-and-Play instead of complicated modifications

The I2M ABS Eliminator for MV Agusta F3 675 / 800 is designed for fully plug-and-play installation. You do not need to cut wires, solder connections, or make changes to the original wiring harness. The original ABS unit is removed, and the emulator is connected directly.

Especially with sporty motorcycles featuring modern Electronics, this is a crucial advantage. When removing the ABS system, it can quickly lead to error messages or unwanted side effects without a suitable emulator solution. With the I2M system, you get a technical solution that has been specifically developed for this purpose.

Clean signal transmission for the remaining vehicle electronics

An important point with ABS delete systems is not only the removal of the unit itself but also the handling of the necessary sensor signals. The I2M Eliminator replicates the required signals from the speed sensors so that other original systems can continue to operate correctly.

Especially with an MV Agusta F3, which is designed for precise feedback and clean handling, this is particularly important. This way, it does not become a makeshift solution but a sensibly integrated component for a professionally built track bike.

Advantages at a glance

• Suitable for MV Agusta F3 675 / 800 (2012–2021)
• Plug-and-play installation without changes to the original wiring harness
• Prevents error messages in the control unit
• Supports the correct transmission of relevant sensor signals
• Very compact and lightweight design
• Developed exclusively for use on the racetrack

Who is the I2M ABS Eliminator the right choice for?

This product is ideal for you if you:

• want to consistently prepare your MV Agusta F3 for track use
• are looking for a clean ABS delete solution without DIY effort
• value plug-and-play and an untouched wiring harness
• want to continue using the vehicle electronics correctly despite the removal of ABS
• want to build your bike functionally and weight-optimized for the track

Important Note

This product is intended exclusively for use on the racetrack and is not approved for public road traffic.

Our Conclusion

The I2M ABS Eliminator for MV Agusta F3 675 / 800 (2012–2021) is the right choice for riders who want to prepare their motorcycle technically clean and without improvisation for track use. The plug-and-play installation, compact design, and secure electronic integration make it a convincing solution for professional track modifications.